Security

Change The ‘sudo’ Password Timeout

Today’s article is going to be a pretty basic article about sudo, where we learn how to change the sudo password timeout. It’s pretty easy to change the sudo password timeout value, and reasonably safe to do so if you use visudo. So, with that in mind, read on!

When you use sudo you’re given a grace period. During that time, you can use sudo again without being asked to type your password again. This is an arbitrary value, typically 15 minutes (I think), and you can customize that value for your particular environment. It’s not difficult.

This is something people may want to change if they’re slow, doing a lot with sudo, or have good physical security. This is also something that someone might want to change for the opposite reason. Some people may want to decrease the length of time that they have with sudo because they work in a shared environment. Who knows? It’s your computer, you can do what you want!

So, what is sudo? It’s how you temporarily use elevated permissions. In fact, I wrote a whole article on this subject, which you can read if you’re so inclined – and I’d suggest doing so if you’re new to Linux:

So, What Is ‘sudo’ Anyhow?

Well then, I mentioned another application. I mentioned ‘visudo’ above.

This may come as a surprise, but I actually wrote an article about visudo! You can read that as well, especially if you’re new to Linux:

Use visudo To Edit The sudoers File

Huh… It’s almost as if I’ve been waiting to write this article for a while and that I took the time to write articles that explain all these things. For a brief moment, one might be fooled into thinking I am good at preparing things. Little do you know… It’d be far more accurate to just say that I’ve written a bunch of articles already. I’d prefer it if you thought it was the former, but there’s definitely a touch of the latter.

Change The sudo Password Timeout:

If you clicked on either of the two links above, you’d know that those tools are used in the terminal. You didn’t click them, did you? Well, you’re going to need an open terminal. In most distros, you can just press CTRL + ALT + T and your default terminal should open. 

With your terminal now open, we’re going to use visudo to edit your sudoers file. In my particular case, we’ll be using Nano. (See? Yet another article you can rely on for more information about Nano!) The command to start banging away on your sudoers file would be simply this:

sudo visudo

Now, I can’t say for sure that you’ll be using Nano for this. As you didn’t click the links above, I’ll remind you that visudo uses your default text editor. So, you’ll need to be prepared for that. Your default text editor may be Vim, for example, and you’ll need to know the basics to change your sudo password timeout.

NOTE: If you want, you can change your default text editor. (Did you see that? I did it again!)

Anyhow…

With your sudoers file now open for editing, you just enter the following on a new line:

Defaults timestamp_timeout=<number_of_minutes>

As far as I can tell, most distros default to 15 minutes. So, you can use sudo and then you won’t be asked for the password again for the next fifteen minutes. In the above, you replace the obvious with the obvious. If you wanted 10 minutes leeway without retyping the password, you’d use this command:

Defaults timestamp_timeout=10

If you wanted an hour’s worth of leeway without typing your sudo password again, then the command would just be this:

Defaults timestamp_timeout=60

See? It’s not very complicated at all.

If you want to be fancy, you could include a comment. A comment starts with an # symbol and is thus ignored by the system. You might want to enter something like this:

# I changed my default sudo timeout value
Defaults timestamp_timeout=30

By adding a comment, you’ll be reminded of what changes you’ve made from the default configuration. This is generally a good idea, especially if you’re going to heavily modify your system.

As this is Nano, you can finish editing the sudoers file by pressing the CTRL + X, then Y, and then the ENTER button. That will save the changes with Nano. If you’re not using Nano, you’ll need to refer to the manual (unless you already know how to save an edited file).

Closure:

And there you go! You can now change your sudo password timeout value to whatever it is you desire, assuming it’s whole minutes. I do not believe it works with fractions of minutes. You shouldn’t need to reboot or anything. It should take effect immediately and be the new timeout value the very next time you use a command that starts with sudo.

Of course, this comes with some security considerations. If this is a public kiosk, you’d have to be a fool to make this longer. You’d have to be a fool to have sudo access to begin with! That’s why they make guest accounts!

But, if you’re home alone and the neighbors aren’t going to sneak in to steal your wifi password, you’re probably good to go. Heck, if you are daring, you can use sudo without a password. I don’t recommend that, but you can… 

Also, this article contains a whole lot of links to other articles. Google will be pleased! I think it speaks to how many articles I’ve already written more than any foresight on my part.

Thanks for reading! If you want to help, or if the site has helped you, you can donate, register to help, write an article, or buy inexpensive hosting to start your site. If you scroll down, you can sign up for the newsletter, vote for the article, and comment.

KGIII

Retired mathematician, residing in the mountains of Maine. I may be old and wise, but I am not infallible. Please point out any errors. And, as always, thanks again for reading.

Recent Posts

Enable/Disable Your Network Interface

Today we'll cover one way to enable or disable your network interface in the Linux…

6 months ago

Check Your NIC Speed In The Terminal

Today's exercise is a nice and simple exercise where we check your NIC speed in…

6 months ago

Easily Monitor Your Wireless Connection

Have you ever wanted to easily monitor your wireless connection? Well, now you can learn…

6 months ago

Count The Files In A Directory

I think I've covered this before with the ls command but this time we'll count…

6 months ago

Get System Information With The ‘uname’ Command In Linux

Today we'll be learning about a basic Linux command that's known as 'uname' and it…

6 months ago

hardinfo Has Been Rebooted As hardinfo2

If you've used hardinfo in the past, it may interest you to know that hardinfo…

6 months ago