Command Line

Let’s Learn About Halt

Today’s article is about the halt command. The reason we’re writing about the halt command today is because I was halfway through another article before I realized I’d already written an article on that subject. So, this is going to just be a nice, easy article.

And, yes, yes I did write more than half of an article that I’ve already written. I ain’t even intoxicated!

The command we’re looking at using today is called ‘halt’. For such a little command, here’s an interesting post about the difference between halt and shutdown. And, if that’s not enough, you can read the other answers and comments on that page. 

Anyhow, halt is described like this in the man page:

halt, poweroff, reboot – Halt, power-off or reboot the machine

Of those three, we’ll just be covering the halt. Yes, the man page contains all three in just one page. They’re all related. As I said, we’ll just be covering the useful features of halt command today.

And, without further ado…

The Halt Command:

This article requires an open terminal, like many other articles on this site. If you don’t know how to open the terminal, you can do so with your keyboard – just press CTRL + ALT + T and your default terminal should open.

Once you have the terminal open, the first use of halt would be just to halt the system:

halt

That will halt your CPU. It probably won’t shutdown your computer all the way, it will just stop it. So too won’t the -f (force) flag. If you force it, it just stops the CPU. It looks like and requires sudo:

sudo halt -f

Finally, of the options we’ll cover, is the -p flag, and the -p stands for poweroff. It’s just another way to shut down your computer, and it obviously looks like this:

sudo halt -p

Those are about the only ways you’re ever going to use it, if you use it at all. It’s not a command that you’re likely to bump into but now you know it exists and how to use it.

Closure:

There you have it, another article. This one covers the halt command in Linux. It’s not a major article, but I needed one in a hurry – just to ensure there’s one scheduled. While my health is mostly returned, I’m still not so caught up that I have a bunch of extra articles. Feel free to step up and write one or two!

Thanks for reading! If you want to help, or if the site has helped you, you can donate, register to help, write an article, or buy inexpensive hosting to start your own site. If you scroll down, you can sign up for the newsletter, vote for the article, and comment.

KGIII

Retired mathematician, residing in the mountains of Maine. I may be old and wise, but I am not infallible. Please point out any errors. And, as always, thanks again for reading.

Recent Posts

Enable/Disable Your Network Interface

Today we'll cover one way to enable or disable your network interface in the Linux…

7 months ago

Check Your NIC Speed In The Terminal

Today's exercise is a nice and simple exercise where we check your NIC speed in…

7 months ago

Easily Monitor Your Wireless Connection

Have you ever wanted to easily monitor your wireless connection? Well, now you can learn…

7 months ago

Count The Files In A Directory

I think I've covered this before with the ls command but this time we'll count…

7 months ago

Get System Information With The ‘uname’ Command In Linux

Today we'll be learning about a basic Linux command that's known as 'uname' and it…

7 months ago

hardinfo Has Been Rebooted As hardinfo2

If you've used hardinfo in the past, it may interest you to know that hardinfo…

7 months ago