Another Way To Show Mounted Filesystems

We’ve covered this topic before, but I want to show you another way that you can show mounted filesystems. As previously covered, you have multiple filesystems mounted at any one time. So, let’s examine them, shall we?

If you use Linux, you use multiple filesystems. There are real and virtual filesystems created and used by the operating system. A real filesystem would be something like a partition on your storage device (one filesystem per partition, of course). A virtual filesystem would be things like your temporary files or cached files, among other filesystems used by the system.

We’ve covered this before and this is just another way to show your mounted filesystems. This is good information to have, as it’s handy to know the path for those things so that you don’t do something silly like misfire a dd command and hosing your OS partition. (Ask me how easy that is.)

Show Your Filesystem In The Linux Terminal
Another Way To View Attached Storage Devices
Another Way To View Attached Storage Devices

(And there are more! This is an oft-covered subject on Linux-Tips!)

So, what will we be using?

findmnt:

You shouldn’t need to install anything for this article. The findmnt tool should be installed by default. You can verify that findmnt is installed by running the following command:

The output of that command should probably match this one:

You check the man page with this command:

There’s additional information available in this application. Run this command:

But, if you check the man page, you’ll see that this is indeed one of the correct tools for the job. This being a basic task, there are many ways to show mounted filesystems. It’s up to you to pick a favorite – or find the most useful of commands for your particular situation.

Anyhow, the man page describes it as:

findmnt – find a filesystem

That’s what we want to do. That means that this is the correct tool for the job.

Show Mounted Filesystems:

You’ve been here long enough to know that we’re likely to use the terminal. If your hunch was that we would be using the terminal, your hunch was correct. You’ll find that findmnt is a terminal-based application so open your default terminal emulator by finding it in your application menu or pressing CTRL + ALT + T on your keyboard.

With your terminal open, you can show mounted filesystems with this command:

You’ll see that it even has a nice tree output. You’ll find things like Snaps have their own filesystem if you’re using a system that uses Snaps. Other jailed applications may also use their own filesystem as a way to keep things separate from the system as a whole. 

Here’s an example truncated output from Lubuntu:

That’s not nearly as complicated as it looks, once you get used to it.

Now, you can trim all that down. You can opt to show only the ‘real’ filesystems. That’s done with the --real flag.

This is an example of that command on that same Lubuntu system used above (Snap applications are seen as ‘real’ filesystems as a part of their separation from the system):

Here’s an example output from a Linux Mint system that does not use Snaps:

You can do more with the findmnt command, such as select the columns you want in your output, so be sure to check the man page. This is just a quick overview because the vast majority of you will never need more than just the basic command.

As I said, it’s a useful command for when you want to verify the path to a filesystem. Beyond that, the usage is up to you. That’s what I use it for when I don’t bother with any one of several other commands.

Closure:

You might see no reason to add this to your list of commands, but it is useful when you want to see all the mounted filesystems on your system. If you need the path for a filesystem, this is a good command. It’s also useful for finding out some attributes of your mounted filesystems.

This is one of those commands you really could keep in your back pocket. You might first lean on a command like lsblk but that only lists block devices – that is, storage devices, and doesn’t include the many other mounted filesystems. If you don’t need this command today, that’s fine. You might need this command in the future, and now you know it exists.

Thanks for reading! If you want to help, or if the site has helped you, you can donate, register to help, write an article, or buy inexpensive hosting to start your site. If you scroll down, you can sign up for the newsletter, vote for the article, and comment.

Last Updated on April 10, 2024 by KGIII

Subscribe to Newsletter!
Get notified when new articles are published!
We promise to never share your email!
icon

Author: KGIII

Retired mathematician, residing in the mountains of Maine. I may be old and wise, but I am not infallible. Please point out any errors. And, as always, thanks again for reading.

Leave a Reply

Your email address will not be published. Required fields are marked *

Linux Tips
Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.