Category: Hardware

Show RAM Information With Ramfetch

Today’s article is going to be an interesting one, an article where you learn how to show RAM information with Ramfetch. For many of you, I expect Ramfetch will be a completely new application, which is nice. However, this article should be simple enough for even a new user. Read on and learn more about your RAM!

By now, you’ve seen some of the following articles:

Neofetch
Screenfetch
CPUfetch

Well, this time around, we’re going to be using a similar application – but one meant specifically for RAM. The name of this application is ‘Ramfetch‘. Let’s just say the idea will be familiar, as you’re already aware of similar applications. At the end, you end up with a handy screen to screenshot to show your friend and family – or to learn from. Bragging rights is always a good reason!

So, then why would you want to do this? Well, Ramfetch gives you some good information about your RAM. It’ll do the basics, like show you what’s free, what’s available, and the total amount of RAM. But, it shows you quite a bit more than that, and it’s data worth looking at for those who want to know more about their RAM.

What we’ll be doing is cloning a git repository, moving a file, and changing the permissions to ensure it can be executed so that you can run the command from anywhere within the terminal.

You’ll need ‘git’ installed, and that should be installed by default in pretty much every major distro. If it’s not, check your package manager – or simply follow the URL in the article and perform the operations manually.

With all that said, let’s just jump into the article!

Show RAM Information With Ramfetch:

Of course, you’re going to need an open terminal. Ramfetch is a terminal-based tool. So, open your default terminal emulator. If you don’t know how to open the terminal, you can do so with your keyboard – just press CTRL + ALT + T and your default terminal should open.

UPDATE: Without letting me know, they changed things up. Follow these new instructions.

With your terminal open, let’s clone the project:

Now, let’s move it to a directory where you can always use it from the terminal, regardless of which directory you’re in:

The next step is to make Ramfetch executable:

With that said and done, just execute the ‘ramfetch’ command to show RAM information with Ramfetch. It’s simply:

Your output might look a little something like this:

ramfetch output
See? It gives you quite a bit of information about your RAM. Handy, huh?

There you have it. You can now show RAM information with Ramfetch! Pretty simple, huh? There’s no man page and the ramfetch --help command doesn’t really show you any other ways to run Ramfetch.

Here’s a better image, as supplied by the author of Ramfetch (o69mar):

Another Ramfetch image.
It does indeed look better, so there’s that!

Closure:

There’s another article said and done. Welcome to the new year and I hope you had a safe New Year’s Eve this year. We start the new year off with a simple enough command, learning how to show RAM information with Ramfetch.

I’ve not missed a publication schedule yet, so we’ll see how much longer this can go on. (I’m sure I’ll miss a publication deadline at some point, but today is not that day. In fact, I wrote this days ahead of time!) So far, so good! I never thought it’d reach this level, by the way.

Thanks for reading! If you want to help, or if the site has helped you, you can donate, register to help, write an article, or buy inexpensive hosting to start your own site. If you scroll down, you can sign up for the newsletter, vote for the article, and comment.

A Couple Of Ways To Get Your Graphics Card Information

Today’s article is just a simple affair, one where I show you a couple of ways to get your graphics card information in the terminal. If that’s the sort of information you’re looking for, this is the article for you. So, do read on!

Using the commands in this article will give you some details that you probably haven’t committed to memory, so it’s a good way to learn your graphics card information. We’re just going to cover a couple of ways – as this is one of those things that can be learned with all sorts of tools.

This article shouldn’t be all that difficult or very long. It’s suitable even for a beginner, allowing new users to get to a point where they’re more comfortable working in the terminal. You largely just need to cut and paste.

We won’t really be doing anything all that new. We’ll use a couple of pretty standard commands to show hardware information, but we’ll then narrow that information down to just showing the graphics card information. So, this isn’t rocket science, it’s just using the terminal to glean the information we are after.

So, with all that in mind – and no further need to write an intro, let’s just head right into the article…

Find Your Graphics Card Information:

Yup. You guessed it. We’re gonna need an open terminal for this one. So open up your favorite terminal. If you don’t know how to open the terminal, you can do so with your keyboard – just press CTRL + ALT + T and your default terminal should open.

The first command is just using ‘lspci’. The ‘lspci’ command lists PCI (peripheral component interconnect) information. We’ll then use a pipe and grep to extract just the information we’re after and nothing more. The command we’ll use to find your graphics card information would be:

The second command is nice and easy. We’ll be using ‘lshw’, a command that simply ‘lists hardware’. It’s a handy command and we should do an entire article on it – and likely will. But, it’s really simple:

Yeah, the ‘lshw’ command requires sudo to gather all the relevant information. There are other tools that don’t require sudo, but this one does. We use it because it’s a pretty standard tool in all the major Linux distros. It’s one of those universal things.

Closure:

There you have it. You have a couple of ways to show the graphics card information in the terminal…

And, son of a biscuit eater… I just noticed I already have an article on this subject. It’s a wee bit different, so I’m just gonna run with this one. Screw it… After this many articles, there’s bound to be some overlap.

Oh well… Oops and all that. I don’t really have time/motivation to delete this one and write a new one.

Thanks for reading! If you want to help, or if the site has helped you, you can donate, register to help, write an article, or buy inexpensive hosting to start your own site. If you scroll down, you can sign up for the newsletter, vote for the article, and comment.

Check Your Frames Per Second (FPS) From The Terminal

Today’s article will be a nice and quick article, where I show you how to check your frames per second (FPS) from the terminal. I promise, it’ll be really simple. Do, please, read on! It’ll be a quick and easy affair!

Amusingly, this was just mentioned at a forum I frequent. At the same time, it was in my notes as an article to cover sometime soon – on a day when I wanted a quick article. Today is a good day for a quick article because I’ve been having some connectivity issues all day.

So… Well, let’s discuss frames per second…

The frames per second is how fast you can show individual frames (individual images) on your screen. This is a function of hardware. Your frame rate is going to be dependent on things like your graphics card (or onboard graphics) and your monitor.

Some frame rates are really fast, others are consistently ‘good enough’ – at least for my needs. I am a simple man that doesn’t game or do anything that’s all that ‘graphics intensive’. For me, a simple on-board GPU and a bog standard LCD monitor is good enough. As of now, I don’t need things like 4k or 8k. Heck, I just use two smaller (30″) monitors and call it good.

But, gamers are obsessed with things like frame rate. They want the most frames per second they can eek out of their machines, and they want it to perform at that rate while the rest of the computer is under heavy load. Don’t complain, those gamers help drive the tech to continued improvement!

Well, this is just a quick way to find your FPS with the terminal. It’s not fancy and it’s not testing the graphics under load.

Check Your Frames Per Second:

As the title suggests, you’re gonna need the terminal open. So many of these articles require an open terminal, so many of you will already know how to do this. For the rest, just press CTRL + ALT + T and your default terminal should open.

With your terminal open, we’ll be using glxgears which should be installed by default in any major distro. If it’s not installed, just use your package manager to find and install it. In it’s basic form, you just call the command with:

If you want to specify which monitor you are using to test your frames per second, should you be using multiple monitors, you can run this command:

If you want to run glxgears and see the render information:

Finally, and I can’t get this to work on any of three devices, you can run it in stereo mode – which should display the test screen twice. It’s like so:

The output, that is your frames per second, will be displayed in the terminal itself. If you want to exit the program, you can close the window it opened or you can press CTRL + C. 

Of course, you can see the same thing I just showed you by running ‘man glxgears‘ in the terminal. It’s not a complicated program, but it will let you check your frames per second.

Closure:

There you have it, a nice and simple article. This time we’ve talked about how to check your frames per second in the terminal, which is kinda neat. There’s just so many things you can do in the terminal. It’s not always complicated. A lot of what you can do is pretty simple.

Thanks for reading! If you want to help, or if the site has helped you, you can donate, register to help, write an article, or buy inexpensive hosting to start your own site. If you scroll down, you can sign up for the newsletter, vote for the article, and comment.

How To: Show Your Hard Drive Specifications In The Terminal

In today’s article, we’re going to explore one way that you can show your hard drive hard drive specifications in the terminal. There’s nothing too challenging in this article, so even new people can follow along.

To be clear, I’m using the phrase ‘hard drive’. In this instance, I’m speaking both of mechanical hard drives (HDD) and solid state drives (SSD). I could probably come up with something better, but we’ll just stick with ‘hard drive’.

You may want to know your hard drive specifications to ensure you got what you paid for. You might also want to know what features it supports – and how long at least one of those features is expected to take. For instance, there’s a secure erase feature on many drives and this takes time. The command we’ll be using may tell you how much time it will take to securely erase the disk.

We’ll be showing the hard drive specifications in the terminal and the biggest tool we’ll be using is ‘hdparm’. It does what it says on the tin and describes itself like:

hdparm – get/set SATA/IDE device parameters

You should find hdparm installed and shouldn’t need to install anything. If you want confirmation that hdparm is installed, run:

You’ll find that there’s a lot to learn about hdparm, but don’t worry about that. You can check the manual if you want:

See also:

Check Disk Speed In The Terminal

So then, let’s just jump into the article…

Show Your Hard Drive Specifications:

As the title suggests, we’ll be using the terminal for this exercise. Open you terminal now. If you don’t know how to open the terminal, you can do so with your keyboard – just press CTRL + ALT + T and your default terminal should open.

With your terminal now open, let’s find your disk drives with the following command.

Your drive should look something like this:

lsblk output
You’re looking on the left, at the base directory – such as ‘sda’ or ‘sdb’.

At this point, you want to note the base – the parent disk drive. In the above image, you see two of them. You see both ‘sda’ and ‘sdb’. Your results can be wildly different, but that’s the information you need.

Now it’s time to show the hard drive specifications. To do that, you’ll want to use a command that looks a lot like this:

An example of that command would look like:

The output is pretty verbose and you can learn a great deal about your hard drive specifications by using the hdparm command. As suggested above, don’t be afraid to run man hdparm to learn more because hdparm is a rather robust application..

Closure:

There you have it, you have another article! This time, you’ll have learned a bit about one way to show your hard drive specifications in the Linux terminal. Pretty sweet! So far we’ve been able to maintain that ‘every other day’ schedule.

Anyhow, please don’t frivolously click ads on the site. Google’s just taking the clicks away and is probably taking away some legitimate clicks while doing so. That’s not helpful! I appreciate it, I appreciate that you’ve whitelisted the site, but Google’s convinced I have invalid traffic and there’s not much I can do about it.

Thanks for reading! If you want to help, or if the site has helped you, you can donate, register to help, write an article, or buy inexpensive hosting to start your own site. If you scroll down, you can sign up for the newsletter, vote for the article, and comment.

How To: Test Your Drive Speed In The Linux Terminal

Today’s article is going to just be a nice and easy article, one that shows you how to test your drive speed in the Linux terminal. It’s easier than you might think and even easy enough that a new Linux user can figure this one out.

Why would you want to do this? Why would you want to test your drive speed in the Linux terminal?

Well, while there are surely GUI ways to accomplish this, you might want to verify that you’re getting the disk speed you paid for. You might also just want to know your drive’s speeds or perhaps you want to post your drive speed on a forum for bragging rights? These terminal commands will also be pretty much universal, across all distros.

It doesn’t matter why you want to test your drive speed, it just matters that you can test it – and that you’ll now know how. And, you know what they say? Knowledge is power!

So, what will we be doing?

Well, we’ll be using the Linux terminal to check how fast we can read and write data to your drives, no matter if they’re spinning platter hard disk drives or solid state drives. The commands will be the same for all drive types and are fairly easy to learn.

So, with all that said and done, let’s get into the article…

Test Your Drive Speed In The Linux Terminal:

Of course, this article will require an open terminal. On Linux-Tips we do a lot in the terminal. It’s fun and fairly universal. If you don’t know how to open the terminal, you can do so with your keyboard – just press CTRL + ALT + T and your default terminal should open.

With your terminal open, you’ll want to run the following command to identify the drive you want want to test. That’s nice and easy, just run:

You’re looking for something like /dev/sda1 or something like /dev/nvme0n1p1 and the lsblk command might help you narrow down which drive it is you want to test.

Once you have identified the drive you want to speed test, you can begin testing. You can first try testing the write speed, that is how fast you can write data to the drive. To do that, you’re command would look like:

For example, if you had ‘sda1‘, your command would look like:

That will tell you how quickly you can write data to your drive, a pretty handy number to know. However, that’s only half of the equation…

You might also want to know how fast you can read data to the drive, the other half of the equation. The command to find the read speed is pretty similar to the command to read the write speed – and that command would look a little something like this:

Or, again, if you want an example of how to test the speed at which you can read data from your drive, an example command would look a little like this:

Note the difference between the commands. In the latter command, we’re writing data from the disk (reading it) and sending it to the bit bucket. With the write command, we’re going the opposite direction. In one case you’re writing from /dev/null and in another case you’re writing to /dev/null. Pretty easy, huh?

Closure:

There it is! This is actually the 301st article written for Linux-Tips.US! This time around we learned how to test your drive speed in the Linux terminal. I told you that it wasn’t too complicated and I stand by it. If you just follow the directions, you’ll learn how to test your drive speed and have another tool in your toolbox.

Thanks for reading! If you want to help, or if the site has helped you, you can donate, register to help, write an article, or buy inexpensive hosting to start your own site. If you scroll down, you can sign up for the newsletter, vote for the article, and comment.

Linux Tips
Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.